Mopar 2019-2024 Dodge Ram 2500-5500 6.7L Cummins Fuel And Oil Kit OEM

Mopar 6.7L Cummins Fuel & Oil Filter Kit
OEM Filters for 2019–2024 Ram 2500/3500/4500/5500

Elevate your 2019–2024 Dodge Ram 6.7L Cummins turbo diesel with the Mopar Fuel & Oil Filter Kit. This OEM replacement set enhances engine efficiency and performance by eliminating fuel and oil contaminants for reliable operation.

Product Specifications:

• Brand: Mopar
• Part Numbers: 68157291AA, 68436631AA, 05083285AA (MO-291, MO-631, MO-285AA)
• SKU: B4L1015AWW
• Weight: 1.02 lbs | Dimensions: 10.08 x 4.84 x 4.49 in
• Product Grade: Performance Part

Compatible Vehicles (2019–2024):
Ram 2500, 3500, 4500, 5500 — 6.7L Cummins Turbo Diesel

What's Included:

• 1x Mopar 68157291AA Fuel Filter (Primary)
• 1x Mopar 68436631AA Fuel Filter (Secondary)
• 1x Mopar 05083285AA Oil Filter

Shipping: Fast delivery, volume discounts, and free shipping throughout the USA.

Oil Filter Replacement Steps:

1. Park on level ground, engage the parking brake, and lift the vehicle if needed.
2. Drain the old oil via the drain plug into a catch pan.
3. Remove the old oil filter with a filter wrench.
4. Lubricate the new filter's gasket with fresh oil, then hand-tighten it snug.
5. Reinstall the drain plug and add new oil per your owner's manual specs.
6. Check the oil level with the dipstick, then start the engine and inspect for leaks.

Fuel Filter Replacement Steps:

1. Remove the fuel pump fuse/relay and start the engine until it stalls to relieve pressure.
2. Disconnect fuel lines and remove both primary and secondary filters with a fuel filter wrench.
3. Install the new filters, matching the flow direction markings, and reconnect the lines.
4. Reinstall the fuel pump fuse/relay.
5. Turn the ignition to "On" (without starting) to pressurize the system and check for leaks.

Final Steps: Dispose of old oil/filters responsibly and record the maintenance for your files.

Always consult your Ram's service manual for exact specs, or a professional mechanic if unsure.

❓ Quick FAQ

Do I need to change both fuel filters together?
Yes — the frame-mounted filter handles water separation, while the engine filter provides a final 4-micron polish. Skipping one leaves the other as a potential failure point.

What socket size do I need?
Both filter housings on the 2019+ Ram 6.7L require a 28mm (1-1/8") socket.

Do the filters come pre-lubricated?
No — apply a thin coat of clean diesel fuel or oil to the new O-rings before installing for a proper seal.